The Set includes a modular ctrlX COREplus X3 controller, a 16-chanel digital input and a 16-channel digital output I/O terminal.
The ctrlX COREplus X3 is pre-licensed with EtherCAT Master, Node-RED and ctrlX PLC . The required application, ctrlX PLC and Node-RED, can be downloaded.
The ctrlX PLC app offers a scalable PLC runtime system based on CODESYS V3, which is completed by comprehensive technology liebraries by Bosch Rexroth.
The Node-RED app is the Node-RED framework adapted for ctrlX AUTOMATION by Bosch Rexroth.
General technical data:
- Processor: Zync Ultrascale+, 64-bit, 4 × ARM A53
- Memory: 2 GB DRAM
- Internal physical memory (eMMC): 4 GB
- Internal nonvolatile memory (NVRAM): 128 kB
- Communication interfaces RJ-45: 3 × Ethernet port (10 Mbit, 100 Mbit, 1 Gbit)
- USB: 1 × USB host, TYPE C (USB2.0), maximum cable length 3 m
- SD card slot for SD card
- Battery: CR1025
- Weight: 370 g
Electrical characteristics:
- Rated voltage at UL: DC 24 V SELV/PELV
- Maximum permissible voltage range of the supply voltage UL: DC 18 V to DC 31.2 V (including all tolerances, including ripple)
- Current consumption of the control from UL at nominal voltage 24 V: 320 mA
- Power consumption of the control from UL at nominal voltage 24 V: 7.68 W
- Reverse polarity protection of supply voltage UL: Present
- Fuse UL: Internal with eFuse, 1.5 A
- Overvoltage protection UL: Present, in case of overvoltage the fuse can be triggered
- Transient protection UL: Present, suppressor diodes, pulse load up to 1500 W
- Voltage dips at power supply interfaces: PS1 < 1 ms, evaluation criterion A, not evaluated by UL
- Potential isolation: DC 707 V
- 24 V supply (UL/UL GND) to functional earth: not evaluated by UL
- 24 V supply voltage (UL/UL GND) to XF10, XF50, XF51: DC 1200 V, not evaluated by UL
About the apps:
ctrlX Node-RED
The Node-RED app is the Node-RED framework from Bosch Rexroth adapted for ctrlX AUTOMATION.
Follow the links below to find the documentation, ctrlX nodes and Node-RED example nodes on Github.
ctrlX PLC
The ctrlX PLC app offers a scalable PLC runtime system based on CODESYS V3, which is supplemented by extensive technology libraries from Bosch Rexroth.
Follow the links below to find documentation, tips on downloading ctrlX WORKS, and information about the ctrlX DataLayer.
